StateVector

class gwpy.timeseries.StateVector(data, bits=None, t0=None, dt=None, sample_rate=None, times=None, channel=None, name=None, **kwargs)[source]

Binary array representing good/bad state determinations of some data.

Each binary bit represents a single boolean condition, with the definitions of all the bits stored in the StateVector.bits attribute.

Parameters
valuearray-like

input data array

bitsBits, list, optional

list of bits defining this StateVector

t0LIGOTimeGPS, float, str, optional

GPS epoch associated with these data, any input parsable by to_gps is fine

dtfloat, Quantity, optional, default: 1

time between successive samples (seconds), can also be given inversely via sample_rate

sample_ratefloat, Quantity, optional, default: 1

the rate of samples per second (Hertz), can also be given inversely via dt

timesarray-like

the complete array of GPS times accompanying the data for this series. This argument takes precedence over t0 and dt so should be given in place of these if relevant, not alongside

namestr, optional

descriptive title for this array

channelChannel, str, optional

source data stream for these data

dtypedtype, optional

input data type

copybool, optional, default: False

choose to copy the input data to new memory

subokbool, optional, default: True

allow passing of sub-classes by the array generator

Notes

Key methods:

fetch(channel, start, end[, bits, host, ...])

Fetch data from NDS into a StateVector.

read(source, *args, **kwargs)

Read data into a StateVector

write(target, *args, **kwargs)

Write this TimeSeries to a file

to_dqflags([bits, minlen, dtype, round])

Convert this StateVector into a DataQualityDict

plot([format, bits])

Plot the data for this StateVector

Attributes Summary

T

View of the transposed array.

base

Base object if memory is from some other object.

bits

list of Bits for this StateVector

boolean

A mapping of this StateVector to a 2-D array containing all binary bits as booleans, for each time point.

cgs

Returns a copy of the current Quantity instance with CGS units.

channel

Instrumental channel associated with these data

ctypes

An object to simplify the interaction of the array with the ctypes module.

data

Python buffer object pointing to the start of the array's data.

dt

X-axis sample separation

dtype

Data-type of the array's elements.

duration

Duration of this series in seconds

dx

X-axis sample separation

epoch

GPS epoch for these data.

equivalencies

A list of equivalencies that will be applied by default during unit conversions.

flags

Information about the memory layout of the array.

flat

A 1-D iterator over the Quantity array.

imag

The imaginary part of the array.

info

Container for meta information like name, description, format.

isscalar

True if the value of this quantity is a scalar, or False if it is an array-like object.

itemsize

Length of one array element in bytes.

name

Name for this data set

nbytes

Total bytes consumed by the elements of the array.

ndim

Number of array dimensions.

real

The real part of the array.

sample_rate

Data rate for this TimeSeries in samples per second (Hertz).

shape

Tuple of array dimensions.

si

Returns a copy of the current Quantity instance with SI units.

size

Number of elements in the array.

span

X-axis [low, high) segment encompassed by these data

strides

Tuple of bytes to step in each dimension when traversing an array.

t0

X-axis coordinate of the first data point

times

Positions of the data on the x-axis

unit

The physical unit of these data

value

The numerical value of this instance.

x0

X-axis coordinate of the first data point

xindex

Positions of the data on the x-axis

xspan

X-axis [low, high) segment encompassed by these data

xunit

Unit of x-axis index

Methods Summary

abs(x, /[, out, where, casting, order, ...])

Calculate the absolute value element-wise.

all([axis, out, keepdims, where])

Returns True if all elements evaluate to True.

any([axis, out, keepdims, where])

Returns True if any of the elements of a evaluate to True.

append(other[, inplace, pad, gap, resize])

Connect another series onto the end of the current one.

argmax([axis, out, keepdims])

Return indices of the maximum values along the given axis.

argmin([axis, out, keepdims])

Return indices of the minimum values along the given axis.

argpartition(kth[, axis, kind, order])

Returns the indices that would partition this array.

argsort([axis, kind, order])

Returns the indices that would sort this array.

astype(dtype[, order, casting, subok, copy])

Copy of the array, cast to a specified type.

byteswap([inplace])

Swap the bytes of the array elements

choose(choices[, out, mode])

Use an index array to construct a new array from a set of choices.

clip([min, max, out])

Return an array whose values are limited to [min, max].

compress(condition[, axis, out])

Return selected slices of this array along given axis.

conj()

Complex-conjugate all elements.

conjugate()

Return the complex conjugate, element-wise.

copy([order])

Return a copy of the array.

crop([start, end, copy])

Crop this series to the given x-axis extent.

cumprod([axis, dtype, out])

Return the cumulative product of the elements along the given axis.

cumsum([axis, dtype, out])

Return the cumulative sum of the elements along the given axis.

decompose([bases])

Generates a new Quantity with the units decomposed.

diagonal([offset, axis1, axis2])

Return specified diagonals.

diff([n, axis])

Calculate the n-th order discrete difference along given axis.

dot(b[, out])

dump(file)

Not implemented, use .value.dump() instead.

dumps()

Returns the pickle of the array as a string.

ediff1d([to_end, to_begin])

fetch(channel, start, end[, bits, host, ...])

Fetch data from NDS into a StateVector.

fetch_open_data(ifo, start, end[, ...])

Fetch open-access data from the LIGO Open Science Center

fill(value)

Fill the array with a scalar value.

find(channel, start, end[, frametype, pad, ...])

Find and read data from frames for a channel

flatten([order])

Return a copy of the array collapsed into one dimension.

from_lal(lalts[, copy])

Generate a new TimeSeries from a LAL TimeSeries of any type.

from_nds2_buffer(buffer_[, scaled, copy])

Construct a new series from an nds2.buffer object

from_pycbc(pycbcseries[, copy])

Convert a pycbc.types.timeseries.TimeSeries into a TimeSeries

get(channel, start, end[, bits])

Get data for this channel from frames or NDS

get_bit_series([bits])

Get the StateTimeSeries for each bit of this StateVector.

getfield(dtype[, offset])

Returns a field of the given array as a certain type.

inject(other)

Add two compatible Series along their shared x-axis values.

insert(obj, values[, axis])

Insert values along the given axis before the given indices and return a new Quantity object.

is_compatible(other)

Check whether this series and other have compatible metadata

is_contiguous(other[, tol])

Check whether other is contiguous with self.

item(*args)

Copy an element of an array to a scalar Quantity and return it.

itemset(*args)

Insert scalar into an array (scalar is cast to array's dtype, if possible)

max([axis, out, keepdims, initial, where])

Return the maximum along a given axis.

mean([axis, dtype, out, keepdims, where])

Returns the average of the array elements along given axis.

median([axis])

Compute the median along the specified axis.

min([axis, out, keepdims, initial, where])

Return the minimum along a given axis.

nansum([axis, out, keepdims, initial, where])

Deprecated since version 5.3.

newbyteorder([new_order])

Return the array with the same data viewed with a different byte order.

nonzero()

Return the indices of the elements that are non-zero.

override_unit(unit[, parse_strict])

Forcefully reset the unit of these data

pad(pad_width, **kwargs)

Pad this series to a new size

partition(kth[, axis, kind, order])

Rearranges the elements in the array in such a way that the value of the element in kth position is in the position it would be in a sorted array.

plot([format, bits])

Plot the data for this StateVector

prepend(other[, inplace, pad, gap, resize])

Connect another series onto the start of the current one.

prod([axis, dtype, out, keepdims, initial, ...])

Return the product of the array elements over the given axis

ptp([axis, out, keepdims])

Peak to peak (maximum - minimum) value along a given axis.

put(indices, values[, mode])

Set a.flat[n] = values[n] for all n in indices.

ravel([order])

Return a flattened array.

read(source, *args, **kwargs)

Read data into a StateVector

repeat(repeats[, axis])

Repeat elements of an array.

resample(rate)

Resample this StateVector to a new rate

reshape(shape[, order])

Returns an array containing the same data with a new shape.

resize(new_shape[, refcheck])

Change shape and size of array in-place.

round([decimals, out])

Return a with each element rounded to the given number of decimals.

searchsorted(v[, side, sorter])

Find indices where elements of v should be inserted in a to maintain order.

setfield(val, dtype[, offset])

Put a value into a specified place in a field defined by a data-type.

setflags([write, align, uic])

Set array flags WRITEABLE, ALIGNED, WRITEBACKIFCOPY, respectively.

shift(delta)

Shift this Series forward on the X-axis by delta

sort([axis, kind, order])

Sort an array in-place.

squeeze([axis])

Remove axes of length one from a.

std([axis, dtype, out, ddof, keepdims, where])

Returns the standard deviation of the array elements along given axis.

step(**kwargs)

Create a step plot of this series

sum([axis, dtype, out, keepdims, initial, where])

Return the sum of the array elements over the given axis.

swapaxes(axis1, axis2)

Return a view of the array with axis1 and axis2 interchanged.

take(indices[, axis, out, mode])

Return an array formed from the elements of a at the given indices.

to(unit[, equivalencies, copy])

Return a new Quantity object with the specified unit.

to_dqflags([bits, minlen, dtype, round])

Convert this StateVector into a DataQualityDict

to_lal()

Convert this TimeSeries into a LAL TimeSeries.

to_pycbc([copy])

Convert this TimeSeries into a PyCBC TimeSeries

to_string([unit, precision, format, subfmt])

Generate a string representation of the quantity and its unit.

to_value([unit, equivalencies])

The numerical value, possibly in a different unit.

tobytes([order])

Not implemented, use .value.tobytes() instead.

tofile(fid[, sep, format])

Not implemented, use .value.tofile() instead.

tolist()

Return the array as an a.ndim-levels deep nested list of Python scalars.

tostring([order])

Construct Python bytes containing the raw data bytes in the array.

trace([offset, axis1, axis2, dtype, out])

Return the sum along diagonals of the array.

transpose(*axes)

Returns a view of the array with axes transposed.

update(other[, inplace])

Update this series by appending new data from an other and dropping the same amount of data off the start.

value_at(x)

Return the value of this Series at the given xindex value

var([axis, dtype, out, ddof, keepdims, where])

Returns the variance of the array elements, along given axis.

view([dtype][, type])

New view of array with the same data.

write(target, *args, **kwargs)

Write this TimeSeries to a file

zip()

Zip the xindex and value arrays of this Series

Attributes Documentation

T

View of the transposed array.

Same as self.transpose().

See also

transpose

Examples

>>> a = np.array([[1, 2], [3, 4]])
>>> a
array([[1, 2],
       [3, 4]])
>>> a.T
array([[1, 3],
       [2, 4]])
>>> a = np.array([1, 2, 3, 4])
>>> a
array([1, 2, 3, 4])
>>> a.T
array([1, 2, 3, 4])
base

Base object if memory is from some other object.

Examples

The base of an array that owns its memory is None:

>>> x = np.array([1,2,3,4])
>>> x.base is None
True

Slicing creates a view, whose memory is shared with x:

>>> y = x[2:]
>>> y.base is x
True
bits

list of Bits for this StateVector

Type

Bits

boolean

A mapping of this StateVector to a 2-D array containing all binary bits as booleans, for each time point.

cgs

Returns a copy of the current Quantity instance with CGS units. The value of the resulting object will be scaled.

channel

Instrumental channel associated with these data

Type

Channel

ctypes

An object to simplify the interaction of the array with the ctypes module.

This attribute creates an object that makes it easier to use arrays when calling shared libraries with the ctypes module. The returned object has, among others, data, shape, and strides attributes (see Notes below) which themselves return ctypes objects that can be used as arguments to a shared library.

Parameters
None
Returns
cPython object

Possessing attributes data, shape, strides, etc.

See also

numpy.ctypeslib

Notes

Below are the public attributes of this object which were documented in “Guide to NumPy” (we have omitted undocumented public attributes, as well as documented private attributes):

_ctypes.data

A pointer to the memory area of the array as a Python integer. This memory area may contain data that is not aligned, or not in correct byte-order. The memory area may not even be writeable. The array flags and data-type of this array should be respected when passing this attribute to arbitrary C-code to avoid trouble that can include Python crashing. User Beware! The value of this attribute is exactly the same as self._array_interface_['data'][0].

Note that unlike data_as, a reference will not be kept to the array: code like ctypes.c_void_p((a + b).ctypes.data) will result in a pointer to a deallocated array, and should be spelt (a + b).ctypes.data_as(ctypes.c_void_p)

_ctypes.shape

(c_intp*self.ndim): A ctypes array of length self.ndim where the basetype is the C-integer corresponding to dtype('p') on this platform (see c_intp). This base-type could be ctypes.c_int, ctypes.c_long, or ctypes.c_longlong depending on the platform. The ctypes array contains the shape of the underlying array.

_ctypes.strides

(c_intp*self.ndim): A ctypes array of length self.ndim where the basetype is the same as for the shape attribute. This ctypes array contains the strides information from the underlying array. This strides information is important for showing how many bytes must be jumped to get to the next element in the array.

_ctypes.data_as(obj)

Return the data pointer cast to a particular c-types object. For example, calling self._as_parameter_ is equivalent to self.data_as(ctypes.c_void_p). Perhaps you want to use the data as a pointer to a ctypes array of floating-point data: self.data_as(ctypes.POINTER(ctypes.c_double)).

The returned pointer will keep a reference to the array.

_ctypes.shape_as(obj)

Return the shape tuple as an array of some other c-types type. For example: self.shape_as(ctypes.c_short).

_ctypes.strides_as(obj)

Return the strides tuple as an array of some other c-types type. For example: self.strides_as(ctypes.c_longlong).

If the ctypes module is not available, then the ctypes attribute of array objects still returns something useful, but ctypes objects are not returned and errors may be raised instead. In particular, the object will still have the as_parameter attribute which will return an integer equal to the data attribute.

Examples

>>> import ctypes
>>> x = np.array([[0, 1], [2, 3]], dtype=np.int32)
>>> x
array([[0, 1],
       [2, 3]], dtype=int32)
>>> x.ctypes.data
31962608 # may vary
>>> x.ctypes.data_as(ctypes.POINTER(ctypes.c_uint32))
<__main__.LP_c_uint object at 0x7ff2fc1fc200> # may vary
>>> x.ctypes.data_as(ctypes.POINTER(ctypes.c_uint32)).contents
c_uint(0)
>>> x.ctypes.data_as(ctypes.POINTER(ctypes.c_uint64)).contents
c_ulong(4294967296)
>>> x.ctypes.shape
<numpy.core._internal.c_long_Array_2 object at 0x7ff2fc1fce60> # may vary
>>> x.ctypes.strides
<numpy.core._internal.c_long_Array_2 object at 0x7ff2fc1ff320> # may vary
data

Python buffer object pointing to the start of the array’s data.

dt

X-axis sample separation

Type

Quantity scalar

dtype

Data-type of the array’s elements.

Warning

Setting arr.dtype is discouraged and may be deprecated in the future. Setting will replace the dtype without modifying the memory (see also ndarray.view and ndarray.astype).

Parameters
None
Returns
dnumpy dtype object

See also

ndarray.astype

Cast the values contained in the array to a new data-type.

ndarray.view

Create a view of the same data but a different data-type.

numpy.dtype

Examples

>>> x
array([[0, 1],
       [2, 3]])
>>> x.dtype
dtype('int32')
>>> type(x.dtype)
<type 'numpy.dtype'>
duration

Duration of this series in seconds

Type

Quantity scalar

dx

X-axis sample separation

Type

Quantity scalar

epoch

GPS epoch for these data.

This attribute is stored internally by the t0 attribute

Type

Time

equivalencies

A list of equivalencies that will be applied by default during unit conversions.

flags

Information about the memory layout of the array.

Notes

The flags object can be accessed dictionary-like (as in a.flags['WRITEABLE']), or by using lowercased attribute names (as in a.flags.writeable). Short flag names are only supported in dictionary access.

Only the WRITEBACKIFCOPY, WRITEABLE, and ALIGNED flags can be changed by the user, via direct assignment to the attribute or dictionary entry, or by calling ndarray.setflags.

The array flags cannot be set arbitrarily:

  • WRITEBACKIFCOPY can only be set False.

  • ALIGNED can only be set True if the data is truly aligned.

  • WRITEABLE can only be set True if the array owns its own memory or the ultimate owner of the memory exposes a writeable buffer interface or is a string.

Arrays can be both C-style and Fortran-style contiguous simultaneously. This is clear for 1-dimensional arrays, but can also be true for higher dimensional arrays.

Even for contiguous arrays a stride for a given dimension arr.strides[dim] may be arbitrary if arr.shape[dim] == 1 or the array has no elements. It does not generally hold that self.strides[-1] == self.itemsize for C-style contiguous arrays or self.strides[0] == self.itemsize for Fortran-style contiguous arrays is true.

Attributes
C_CONTIGUOUS (C)

The data is in a single, C-style contiguous segment.

F_CONTIGUOUS (F)

The data is in a single, Fortran-style contiguous segment.

OWNDATA (O)

The array owns the memory it uses or borrows it from another object.

WRITEABLE (W)

The data area can be written to. Setting this to False locks the data, making it read-only. A view (slice, etc.) inherits WRITEABLE from its base array at creation time, but a view of a writeable array may be subsequently locked while the base array remains writeable. (The opposite is not true, in that a view of a locked array may not be made writeable. However, currently, locking a base object does not lock any views that already reference it, so under that circumstance it is possible to alter the contents of a locked array via a previously created writeable view onto it.) Attempting to change a non-writeable array raises a RuntimeError exception.

ALIGNED (A)

The data and all elements are aligned appropriately for the hardware.

WRITEBACKIFCOPY (X)

This array is a copy of some other array. The C-API function PyArray_ResolveWritebackIfCopy must be called before deallocating to the base array will be updated with the contents of this array.

FNC

F_CONTIGUOUS and not C_CONTIGUOUS.

FORC

F_CONTIGUOUS or C_CONTIGUOUS (one-segment test).

BEHAVED (B)

ALIGNED and WRITEABLE.

CARRAY (CA)

BEHAVED and C_CONTIGUOUS.

FARRAY (FA)

BEHAVED and F_CONTIGUOUS and not C_CONTIGUOUS.

flat

A 1-D iterator over the Quantity array.

This returns a QuantityIterator instance, which behaves the same as the flatiter instance returned by flat, and is similar to, but not a subclass of, Python’s built-in iterator object.

imag

The imaginary part of the array.

Examples

>>> x = np.sqrt([1+0j, 0+1j])
>>> x.imag
array([ 0.        ,  0.70710678])
>>> x.imag.dtype
dtype('float64')
info

Container for meta information like name, description, format. This is required when the object is used as a mixin column within a table, but can be used as a general way to store meta information.

isscalar

True if the value of this quantity is a scalar, or False if it is an array-like object.

Note

This is subtly different from numpy.isscalar in that numpy.isscalar returns False for a zero-dimensional array (e.g. np.array(1)), while this is True for quantities, since quantities cannot represent true numpy scalars.

itemsize

Length of one array element in bytes.

Examples

>>> x = np.array([1,2,3], dtype=np.float64)
>>> x.itemsize
8
>>> x = np.array([1,2,3], dtype=np.complex128)
>>> x.itemsize
16
name

Name for this data set

Type

str

nbytes

Total bytes consumed by the elements of the array.

See also

sys.getsizeof

Memory consumed by the object itself without parents in case view. This does include memory consumed by non-element attributes.

Notes

Does not include memory consumed by non-element attributes of the array object.

Examples

>>> x = np.zeros((3,5,2), dtype=np.complex128)
>>> x.nbytes
480
>>> np.prod(x.shape) * x.itemsize
480
ndim

Number of array dimensions.

Examples

>>> x = np.array([1, 2, 3])
>>> x.ndim
1
>>> y = np.zeros((2, 3, 4))
>>> y.ndim
3
real

The real part of the array.

See also

numpy.real

equivalent function

Examples

>>> x = np.sqrt([1+0j, 0+1j])
>>> x.real
array([ 1.        ,  0.70710678])
>>> x.real.dtype
dtype('float64')
sample_rate

Data rate for this TimeSeries in samples per second (Hertz).

This attribute is stored internally by the dx attribute

Type

Quantity scalar

shape

Tuple of array dimensions.

The shape property is usually used to get the current shape of an array, but may also be used to reshape the array in-place by assigning a tuple of array dimensions to it. As with numpy.reshape, one of the new shape dimensions can be -1, in which case its value is inferred from the size of the array and the remaining dimensions. Reshaping an array in-place will fail if a copy is required.

Warning

Setting arr.shape is discouraged and may be deprecated in the future. Using ndarray.reshape is the preferred approach.

See also

numpy.shape

Equivalent getter function.

numpy.reshape

Function similar to setting shape.

ndarray.reshape

Method similar to setting shape.

Examples

>>> x = np.array([1, 2, 3, 4])
>>> x.shape
(4,)
>>> y = np.zeros((2, 3, 4))
>>> y.shape
(2, 3, 4)
>>> y.shape = (3, 8)
>>> y
array([[ 0.,  0.,  0.,  0.,  0.,  0.,  0.,  0.],
       [ 0.,  0.,  0.,  0.,  0.,  0.,  0.,  0.],
       [ 0.,  0.,  0.,  0.,  0.,  0.,  0.,  0.]])
>>> y.shape = (3, 6)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ValueError: total size of new array must be unchanged
>>> np.zeros((4,2))[::2].shape = (-1,)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
AttributeError: Incompatible shape for in-place modification. Use
`.reshape()` to make a copy with the desired shape.
si

Returns a copy of the current Quantity instance with SI units. The value of the resulting object will be scaled.

size

Number of elements in the array.

Equal to np.prod(a.shape), i.e., the product of the array’s dimensions.

Notes

a.size returns a standard arbitrary precision Python integer. This may not be the case with other methods of obtaining the same value (like the suggested np.prod(a.shape), which returns an instance of np.int_), and may be relevant if the value is used further in calculations that may overflow a fixed size integer type.

Examples

>>> x = np.zeros((3, 5, 2), dtype=np.complex128)
>>> x.size
30
>>> np.prod(x.shape)
30
span

X-axis [low, high) segment encompassed by these data

Type

Segment

strides

Tuple of bytes to step in each dimension when traversing an array.

The byte offset of element (i[0], i[1], ..., i[n]) in an array a is:

offset = sum(np.array(i) * a.strides)

A more detailed explanation of strides can be found in the “ndarray.rst” file in the NumPy reference guide.

Warning

Setting arr.strides is discouraged and may be deprecated in the future. numpy.lib.stride_tricks.as_strided should be preferred to create a new view of the same data in a safer way.

Notes

Imagine an array of 32-bit integers (each 4 bytes):

x = np.array([[0, 1, 2, 3, 4],
              [5, 6, 7, 8, 9]], dtype=np.int32)

This array is stored in memory as 40 bytes, one after the other (known as a contiguous block of memory). The strides of an array tell us how many bytes we have to skip in memory to move to the next position along a certain axis. For example, we have to skip 4 bytes (1 value) to move to the next column, but 20 bytes (5 values) to get to the same position in the next row. As such, the strides for the array x will be (20, 4).

Examples

>>> y = np.reshape(np.arange(2*3*4), (2,3,4))
>>> y
array([[[ 0,  1,  2,  3],
        [ 4,  5,  6,  7],
        [ 8,  9, 10, 11]],
       [[12, 13, 14, 15],
        [16, 17, 18, 19],
        [20, 21, 22, 23]]])
>>> y.strides
(48, 16, 4)
>>> y[1,1,1]
17
>>> offset=sum(y.strides * np.array((1,1,1)))
>>> offset/y.itemsize
17
>>> x = np.reshape(np.arange(5*6*7*8), (5,6,7,8)).transpose(2,3,1,0)
>>> x.strides
(32, 4, 224, 1344)
>>> i = np.array([3,5,2,2])
>>> offset = sum(i * x.strides)
>>> x[3,5,2,2]
813
>>> offset / x.itemsize
813
t0

X-axis coordinate of the first data point

Type

Quantity scalar

times

Positions of the data on the x-axis

Type

Quantity array

unit

The physical unit of these data

Type

UnitBase

value

The numerical value of this instance.

See also

to_value

Get the numerical value in a given unit.

x0

X-axis coordinate of the first data point

Type

Quantity scalar

xindex

Positions of the data on the x-axis

Type

Quantity array

xspan

X-axis [low, high) segment encompassed by these data

Type

Segment

xunit

Unit of x-axis index

Type

Unit

Methods Documentation

abs(x, /, out=None, *, where=True, casting='same_kind', order='K', dtype=None, subok=True[, signature, extobj])[source]

Calculate the absolute value element-wise.

np.abs is a shorthand for this function.

Parameters
xarray_like

Input array.

outndarray, None, or tuple of ndarray and None, optional

A location into which the result is stored. If provided, it must have a shape that the inputs broadcast to. If not provided or None, a freshly-allocated array is returned. A tuple (possible only as a keyword argument) must have length equal to the number of outputs.

wherearray_like, optional

This condition is broadcast over the input. At locations where the condition is True, the out array will be set to the ufunc result. Elsewhere, the out array will retain its original value. Note that if an uninitialized out array is created via the default out=None, locations within it where the condition is False will remain uninitialized.

**kwargs

For other keyword-only arguments, see the ufunc docs.

Returns
absolutendarray

An ndarray containing the absolute value of each element in x. For complex input, a + ib, the absolute value is

System Message: WARNING/2 (\sqrt{ a^2 + b^2 })

latex exited with error [stdout] This is pdfTeX, Version 3.14159265-2.6-1.40.19 (TeX Live 2018) (preloaded format=latex) restricted \write18 enabled. entering extended mode (./math.tex LaTeX2e <2017-04-15> Babel <3.17> and hyphenation patterns for 3 language(s) loaded. (/usr/share/texlive/texmf-dist/tex/latex/base/article.cls Document Class: article 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size12.clo)) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) ! LaTeX Error: File `amsthm.sty' not found. Type X to quit or <RETURN> to proceed, or enter new name. (Default extension: sty) Enter file name: ! Emergency stop. <read *> l.5 \usepackage {amssymb}^^M No pages of output. Transcript written on math.log.

. This is a scalar if x is a scalar.

Examples

>>> x = np.array([-1.2, 1.2])
>>> np.absolute(x)
array([ 1.2,  1.2])
>>> np.absolute(1.2 + 1j)
1.5620499351813308

Plot the function over [-10, 10]:

>>> import matplotlib.pyplot as plt
>>> x = np.linspace(start=-10, stop=10, num=101)
>>> plt.plot(x, np.absolute(x))
>>> plt.show()

(png)

../../_images/gwpy-timeseries-StateVector-1_00_00.png

Plot the function over the complex plane:

>>> xx = x + 1j * x[:, np.newaxis]
>>> plt.imshow(np.abs(xx), extent=[-10, 10, -10, 10], cmap='gray')
>>> plt.show()

(png)

../../_images/gwpy-timeseries-StateVector-1_01_00.png

The abs function can be used as a shorthand for np.absolute on ndarrays.

>>> x = np.array([-1.2, 1.2])
>>> abs(x)
array([1.2, 1.2])
all(axis=None, out=None, keepdims=False, *, where=True)

Returns True if all elements evaluate to True.

Refer to numpy.all for full documentation.

See also

numpy.all

equivalent function

any(axis=None, out=None, keepdims=False, *, where=True)

Returns True if any of the elements of a evaluate to True.

Refer to numpy.any for full documentation.

See also

numpy.any

equivalent function

append(other, inplace=True, pad=None, gap=None, resize=True)[source]

Connect another series onto the end of the current one.

Parameters
otherSeries

another series of the same type to connect to this one

inplacebool, optional

perform operation in-place, modifying current series, otherwise copy data and return new series, default: True

Warning

inplace append bypasses the reference check in numpy.ndarray.resize, so be carefully to only use this for arrays that haven’t been sharing their memory!

padfloat, optional

value with which to pad discontiguous series, by default gaps will result in a ValueError.

gapstr, optional

action to perform if there’s a gap between the other series and this one. One of

  • 'raise' - raise a ValueError

  • 'ignore' - remove gap and join data

  • 'pad' - pad gap with zeros

If pad is given and is not None, the default is 'pad', otherwise 'raise'. If gap='pad' is given, the default for pad is 0.

resizebool, optional

resize this array to accommodate new data, otherwise shift the old data to the left (potentially falling off the start) and put the new data in at the end, default: True.

Returns
seriesSeries

a new series containing joined data sets

argmax(axis=None, out=None, *, keepdims=False)

Return indices of the maximum values along the given axis.

Refer to numpy.argmax for full documentation.

See also

numpy.argmax

equivalent function

argmin(axis=None, out=None, *, keepdims=False)

Return indices of the minimum values along the given axis.

Refer to numpy.argmin for detailed documentation.

See also

numpy.argmin

equivalent function

argpartition(kth, axis=- 1, kind='introselect', order=None)

Returns the indices that would partition this array.

Refer to numpy.argpartition for full documentation.

New in version 1.8.0.

See also

numpy.argpartition

equivalent function

argsort(axis=- 1, kind=None, order=None)

Returns the indices that would sort this array.

Refer to numpy.argsort for full documentation.

See also

numpy.argsort

equivalent function

astype(dtype, order='K', casting='unsafe', subok=True, copy=True)

Copy of the array, cast to a specified type.

Parameters
dtypestr or dtype

Typecode or data-type to which the array is cast.

order{‘C’, ‘F’, ‘A’, ‘K’}, optional

Controls the memory layout order of the result. ‘C’ means C order, ‘F’ means Fortran order, ‘A’ means ‘F’ order if all the arrays are Fortran contiguous, ‘C’ order otherwise, and ‘K’ means as close to the order the array elements appear in memory as possible. Default is ‘K’.

casting{‘no’, ‘equiv’, ‘safe’, ‘same_kind’, ‘unsafe’}, optional

Controls what kind of data casting may occur. Defaults to ‘unsafe’ for backwards compatibility.

  • ‘no’ means the data types should not be cast at all.

  • ‘equiv’ means only byte-order changes are allowed.

  • ‘safe’ means only casts which can preserve values are allowed.

  • ‘same_kind’ means only safe casts or casts within a kind, like float64 to float32, are allowed.

  • ‘unsafe’ means any data conversions may be done.

subokbool, optional

If True, then sub-classes will be passed-through (default), otherwise the returned array will be forced to be a base-class array.

copybool, optional

By default, astype always returns a newly allocated array. If this is set to false, and the dtype, order, and subok requirements are satisfied, the input array is returned instead of a copy.

Returns
arr_tndarray

Unless copy is False and the other conditions for returning the input array are satisfied (see description for copy input parameter), arr_t is a new array of the same shape as the input array, with dtype, order given by dtype, order.

Raises
ComplexWarning

When casting from complex to float or int. To avoid this, one should use a.real.astype(t).

Notes

Changed in version 1.17.0: Casting between a simple data type and a structured one is possible only for “unsafe” casting. Casting to multiple fields is allowed, but casting from multiple fields is not.

Changed in version 1.9.0: Casting from numeric to string types in ‘safe’ casting mode requires that the string dtype length is long enough to store the max integer/float value converted.

Examples

>>> x = np.array([1, 2, 2.5])
>>> x
array([1. ,  2. ,  2.5])
>>> x.astype(int)
array([1, 2, 2])
byteswap(inplace=False)

Swap the bytes of the array elements

Toggle between low-endian and big-endian data representation by returning a byteswapped array, optionally swapped in-place. Arrays of byte-strings are not swapped. The real and imaginary parts of a complex number are swapped individually.

Parameters
inplacebool, optional

If True, swap bytes in-place, default is False.

Returns
outndarray

The byteswapped array. If inplace is True, this is a view to self.

Examples

>>> A = np.array([1, 256, 8755], dtype=np.int16)
>>> list(map(hex, A))
['0x1', '0x100', '0x2233']
>>> A.byteswap(inplace=True)
array([  256,     1, 13090], dtype=int16)
>>> list(map(hex, A))
['0x100', '0x1', '0x3322']

Arrays of byte-strings are not swapped

>>> A = np.array([b'ceg', b'fac'])
>>> A.byteswap()
array([b'ceg', b'fac'], dtype='|S3')
A.newbyteorder().byteswap() produces an array with the same values

but different representation in memory

>>> A = np.array([1, 2, 3])
>>> A.view(np.uint8)
array([1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0,
       0, 0], dtype=uint8)
>>> A.newbyteorder().byteswap(inplace=True)
array([1, 2, 3])
>>> A.view(np.uint8)
array([0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0,
       0, 3], dtype=uint8)
choose(choices, out=None, mode='raise')

Use an index array to construct a new array from a set of choices.

Refer to numpy.choose for full documentation.

See also

numpy.choose

equivalent function

clip(min=None, max=None, out=None, **kwargs)

Return an array whose values are limited to [min, max]. One of max or min must be given.

Refer to numpy.clip for full documentation.

See also

numpy.clip

equivalent function

compress(condition, axis=None, out=None)

Return selected slices of this array along given axis.

Refer to numpy.compress for full documentation.

See also

numpy.compress

equivalent function

conj()

Complex-conjugate all elements.

Refer to numpy.conjugate for full documentation.

See also

numpy.conjugate

equivalent function

conjugate()

Return the complex conjugate, element-wise.

Refer to numpy.conjugate for full documentation.

See also

numpy.conjugate

equivalent function

copy(order='C')[source]

Return a copy of the array.

Parameters
order{‘C’, ‘F’, ‘A’, ‘K’}, optional

Controls the memory layout of the copy. ‘C’ means C-order, ‘F’ means F-order, ‘A’ means ‘F’ if a is Fortran contiguous, ‘C’ otherwise. ‘K’ means match the layout of a as closely as possible. (Note that this function and numpy.copy() are very similar but have different default values for their order= arguments, and this function always passes sub-classes through.)

See also

numpy.copy

Similar function with different default behavior

numpy.copyto

Notes

This function is the preferred method for creating an array copy. The function numpy.copy() is similar, but it defaults to using order ‘K’, and will not pass sub-classes through by default.

Examples

>>> x = np.array([[1,2,3],[4,5,6]], order='F')
>>> y = x.copy()
>>> x.fill(0)
>>> x
array([[0, 0, 0],
       [0, 0, 0]])
>>> y
array([[1, 2, 3],
       [4, 5, 6]])
>>> y.flags['C_CONTIGUOUS']
True
crop(start=None, end=None, copy=False)[source]

Crop this series to the given x-axis extent.

Parameters
startfloat, optional

Lower limit of x-axis to crop to, defaults to x0.

endfloat, optional

Upper limit of x-axis to crop to, defaults to series end.

copybool, optional

Copy the input data to fresh memory, otherwise return a view (default).

Returns
seriesSeries

A new series with a sub-set of the input data.

Notes

If either start or end are outside of the original Series span, warnings will be printed and the limits will be restricted to the xspan.

cumprod(axis=None, dtype=None, out=None)

Return the cumulative product of the elements along the given axis.

Refer to numpy.cumprod for full documentation.

See also

numpy.cumprod

equivalent function

cumsum(axis=None, dtype=None, out=None)

Return the cumulative sum of the elements along the given axis.

Refer to numpy.cumsum for full documentation.

See also

numpy.cumsum

equivalent function

decompose(bases=[])

Generates a new Quantity with the units decomposed. Decomposed units have only irreducible units in them (see astropy.units.UnitBase.decompose).

Parameters
basessequence of UnitBase, optional

The bases to decompose into. When not provided, decomposes down to any irreducible units. When provided, the decomposed result will only contain the given units. This will raises a UnitsError if it’s not possible to do so.

Returns
newqQuantity

A new object equal to this quantity with units decomposed.

diagonal(offset=0, axis1=0, axis2=1)

Return specified diagonals. In NumPy 1.9 the returned array is a read-only view instead of a copy as in previous NumPy versions. In a future version the read-only restriction will be removed.

Refer to numpy.diagonal() for full documentation.

See also

numpy.diagonal

equivalent function

diff(n=1, axis=- 1)[source]

Calculate the n-th order discrete difference along given axis.

The first order difference is given by out[n] = a[n+1] - a[n] along the given axis, higher order differences are calculated by using diff recursively.

Parameters
nint, optional

The number of times values are differenced.

axisint, optional

The axis along which the difference is taken, default is the last axis.

Returns
diffSeries

The n order differences. The shape of the output is the same as the input, except along axis where the dimension is smaller by n.

See also

numpy.diff

for documentation on the underlying method

dot(b, out=None)
dump(file)

Not implemented, use .value.dump() instead.

dumps()[source]

Returns the pickle of the array as a string. pickle.loads will convert the string back to an array.

Parameters
None
ediff1d(to_end=None, to_begin=None)
classmethod fetch(channel, start, end, bits=None, host=None, port=None, verbose=False, connection=None, type=127)[source]

Fetch data from NDS into a StateVector.

Parameters
channelstr, Channel

the name of the channel to read, or a Channel object.

startLIGOTimeGPS, float, str

GPS start time of required data, any input parseable by to_gps is fine

endLIGOTimeGPS, float, str

GPS end time of required data, any input parseable by to_gps is fine

bitsBits, list, optional

definition of bits for this StateVector

hoststr, optional

URL of NDS server to use, defaults to observatory site host

portint, optional

port number for NDS server query, must be given with host

verifybool, optional, default: True

check channels exist in database before asking for data

connectionnds2.connection

open NDS connection to use

verbosebool, optional

print verbose output about NDS progress

typeint, optional

NDS2 channel type integer

dtypetype, numpy.dtype, str, optional

identifier for desired output data type

classmethod fetch_open_data(ifo, start, end, sample_rate=4096, version=None, format='hdf5', host='https://gwosc.org', verbose=False, cache=None, **kwargs)[source]

Fetch open-access data from the LIGO Open Science Center

Parameters
ifostr

the two-character prefix of the IFO in which you are interested, e.g. 'L1'

startLIGOTimeGPS, float, str, optional

GPS start time of required data, defaults to start of data found; any input parseable by to_gps is fine

endLIGOTimeGPS, float, str, optional

GPS end time of required data, defaults to end of data found; any input parseable by to_gps is fine

sample_ratefloat, optional,

the sample rate of desired data; most data are stored by GWOSC at 4096 Hz, however there may be event-related data releases with a 16384 Hz rate, default: 4096

versionint, optional

version of files to download, defaults to highest discovered version

formatstr, optional

the data format to download and parse, default: 'h5py'

hoststr, optional

HTTP host name of GWOSC server to access

verbosebool, optional, default: False

print verbose output while fetching data

cachebool, optional

save/read a local copy of the remote URL, default: False; useful if the same remote data are to be accessed multiple times. Set GWPY_CACHE=1 in the environment to auto-cache.

**kwargs

any other keyword arguments are passed to the TimeSeries.read method that parses the file that was downloaded

Notes

StateVector data are not available in txt.gz format.

Examples

>>> from gwpy.timeseries import (TimeSeries, StateVector)
>>> print(TimeSeries.fetch_open_data('H1', 1126259446, 1126259478))
TimeSeries([  2.17704028e-19,  2.08763900e-19,  2.39681183e-19,
            ...,   3.55365541e-20,  6.33533516e-20,
              7.58121195e-20]
           unit: Unit(dimensionless),
           t0: 1126259446.0 s,
           dt: 0.000244140625 s,
           name: Strain,
           channel: None)
>>> print(StateVector.fetch_open_data('H1', 1126259446, 1126259478))
StateVector([127,127,127,127,127,127,127,127,127,127,127,127,
             127,127,127,127,127,127,127,127,127,127,127,127,
             127,127,127,127,127,127,127,127]
            unit: Unit(dimensionless),
            t0: 1126259446.0 s,
            dt: 1.0 s,
            name: Data quality,
            channel: None,
            bits: Bits(0: data present
                       1: passes cbc CAT1 test
                       2: passes cbc CAT2 test
                       3: passes cbc CAT3 test
                       4: passes burst CAT1 test
                       5: passes burst CAT2 test
                       6: passes burst CAT3 test,
                       channel=None,
                       epoch=1126259446.0))

For the StateVector, the naming of the bits will be format-dependent, because they are recorded differently by GWOSC in different formats.

fill(value)

Fill the array with a scalar value.

Parameters
valuescalar

All elements of a will be assigned this value.

Examples

>>> a = np.array([1, 2])
>>> a.fill(0)
>>> a
array([0, 0])
>>> a = np.empty(2)
>>> a.fill(1)
>>> a
array([1.,  1.])

Fill expects a scalar value and always behaves the same as assigning to a single array element. The following is a rare example where this distinction is important:

>>> a = np.array([None, None], dtype=object)
>>> a[0] = np.array(3)
>>> a
array([array(3), None], dtype=object)
>>> a.fill(np.array(3))
>>> a
array([array(3), array(3)], dtype=object)

Where other forms of assignments will unpack the array being assigned:

>>> a[...] = np.array(3)
>>> a
array([3, 3], dtype=object)
classmethod find(channel, start, end, frametype=None, pad=None, scaled=None, nproc=1, verbose=False, **readargs)[source]

Find and read data from frames for a channel

Parameters
channelstr, Channel

the name of the channel to read, or a Channel object.

startLIGOTimeGPS, float, str

GPS start time of required data, any input parseable by to_gps is fine

endLIGOTimeGPS, float, str

GPS end time of required data, any input parseable by to_gps is fine

frametypestr, optional

name of frametype in which this channel is stored, will search for containing frame types if necessary

nprocint, optional, default: 1

number of parallel processes to use, serial process by default.

padfloat, optional

value with which to fill gaps in the source data, by default gaps will result in a ValueError.

allow_tapebool, optional, default: True

allow reading from frame files on (slow) magnetic tape

verbosebool, optional

print verbose output about read progress, if verbose is specified as a string, this defines the prefix for the progress meter

**readargs

any other keyword arguments to be passed to read()

flatten(order='C')[source]

Return a copy of the array collapsed into one dimension.

Any index information is removed as part of the flattening, and the result is returned as a Quantity array.

Parameters
order{‘C’, ‘F’, ‘A’, ‘K’}, optional

‘C’ means to flatten in row-major (C-style) order. ‘F’ means to flatten in column-major (Fortran- style) order. ‘A’ means to flatten in column-major order if a is Fortran contiguous in memory, row-major order otherwise. ‘K’ means to flatten a in the order the elements occur in memory. The default is ‘C’.

Returns
yQuantity

A copy of the input array, flattened to one dimension.

See also

ravel

Return a flattened array.

flat

A 1-D flat iterator over the array.

Examples

>>> a = Array([[1,2], [3,4]], unit='m', name='Test')
>>> a.flatten()
<Quantity [1., 2., 3., 4.] m>
classmethod from_lal(lalts, copy=True)[source]

Generate a new TimeSeries from a LAL TimeSeries of any type.

classmethod from_nds2_buffer(buffer_, scaled=None, copy=True, **metadata)[source]

Construct a new series from an nds2.buffer object

Requires: |nds2|_

Parameters
buffer_nds2.buffer

the input NDS2-client buffer to read

scaledbool, optional

apply slope and bias calibration to ADC data, for non-ADC data this option has no effect

copybool, optional

if True, copy the contained data array to new to a new array

**metadata

any other metadata keyword arguments to pass to the TimeSeries constructor

Returns
timeseriesTimeSeries

a new TimeSeries containing the data from the nds2.buffer, and the appropriate metadata

classmethod from_pycbc(pycbcseries, copy=True)[source]

Convert a pycbc.types.timeseries.TimeSeries into a TimeSeries

Parameters
pycbcseriespycbc.types.timeseries.TimeSeries

the input PyCBC TimeSeries array

copybool, optional, default: True

if True, copy these data to a new array

Returns
timeseriesTimeSeries

a GWpy version of the input timeseries

classmethod get(channel, start, end, bits=None, **kwargs)[source]

Get data for this channel from frames or NDS

Parameters
channelstr, Channel

the name of the channel to read, or a Channel object.

startLIGOTimeGPS, float, str

GPS start time of required data, any input parseable by to_gps is fine

endLIGOTimeGPS, float, str

GPS end time of required data, any input parseable by to_gps is fine

bitsBits, list, optional

definition of bits for this StateVector

padfloat, optional

value with which to fill gaps in the source data, only used if gap is not given, or gap='pad' is given

dtypenumpy.dtype, str, type, or dict

numeric data type for returned data, e.g. numpy.float, or dict of (channel, dtype) pairs

nprocint, optional, default: 1

number of parallel processes to use, serial process by default.

verbosebool, optional

print verbose output about NDS progress.

**kwargs

other keyword arguments to pass to either find() (for direct GWF file access) or fetch() for remote NDS2 access

See also

StateVector.fetch

for grabbing data from a remote NDS2 server

StateVector.find

for discovering and reading data from local GWF files

get_bit_series(bits=None)[source]

Get the StateTimeSeries for each bit of this StateVector.

Parameters
bitslist, optional

a list of bit indices or bit names, defaults to all bits

Returns
bitseriesStateTimeSeriesDict

a dict of StateTimeSeries, one for each given bit

getfield(dtype, offset=0)

Returns a field of the given array as a certain type.

A field is a view of the array data with a given data-type. The values in the view are determined by the given type and the offset into the current array in bytes. The offset needs to be such that the view dtype fits in the array dtype; for example an array of dtype complex128 has 16-byte elements. If taking a view with a 32-bit integer (4 bytes), the offset needs to be between 0 and 12 bytes.

Parameters
dtypestr or dtype

The data type of the view. The dtype size of the view can not be larger than that of the array itself.

offsetint

Number of bytes to skip before beginning the element view.

Examples

>>> x = np.diag([1.+1.j]*2)
>>> x[1, 1] = 2 + 4.j
>>> x
array([[1.+1.j,  0.+0.j],
       [0.+0.j,  2.+4.j]])
>>> x.getfield(np.float64)
array([[1.,  0.],
       [0.,  2.]])

By choosing an offset of 8 bytes we can select the complex part of the array for our view:

>>> x.getfield(np.float64, offset=8)
array([[1.,  0.],
       [0.,  4.]])
inject(other)[source]

Add two compatible Series along their shared x-axis values.

Parameters
otherSeries

a Series whose xindex intersects with self.xindex

Returns
outSeries

the sum of self and other along their shared x-axis values

Raises
ValueError

if self and other have incompatible units or xindex intervals

Notes

If other.xindex and self.xindex do not intersect, this method will return a copy of self. If the series have uniformly offset indices, this method will raise a warning.

If self.xindex is an array of timestamps, and if other.xspan is not a subset of self.xspan, then other will be cropped before being adding to self.

Users who wish to taper or window their Series should do so before passing it to this method. See TimeSeries.taper() and planck() for more information.

insert(obj, values, axis=None)

Insert values along the given axis before the given indices and return a new Quantity object.

This is a thin wrapper around the numpy.insert function.

Parameters
objint, slice or sequence of int

Object that defines the index or indices before which values is inserted.

valuesarray-like

Values to insert. If the type of values is different from that of quantity, values is converted to the matching type. values should be shaped so that it can be broadcast appropriately The unit of values must be consistent with this quantity.

axisint, optional

Axis along which to insert values. If axis is None then the quantity array is flattened before insertion.

Returns
outQuantity

A copy of quantity with values inserted. Note that the insertion does not occur in-place: a new quantity array is returned.

Examples

>>> import astropy.units as u
>>> q = [1, 2] * u.m
>>> q.insert(0, 50 * u.cm)
<Quantity [ 0.5,  1.,  2.] m>
>>> q = [[1, 2], [3, 4]] * u.m
>>> q.insert(1, [10, 20] * u.m, axis=0)
<Quantity [[  1.,  2.],
           [ 10., 20.],
           [  3.,  4.]] m>
>>> q.insert(1, 10 * u.m, axis=1)
<Quantity [[  1., 10.,  2.],
           [  3., 10.,  4.]] m>
is_compatible(other)[source]

Check whether this series and other have compatible metadata

This method tests that the sample size, and the unit match.

is_contiguous(other, tol=3.814697265625e-06)[source]

Check whether other is contiguous with self.

Parameters
otherSeries, numpy.ndarray

another series of the same type to test for contiguity

tolfloat, optional

the numerical tolerance of the test

Returns
1

if other is contiguous with this series, i.e. would attach seamlessly onto the end

-1

if other is anti-contiguous with this seires, i.e. would attach seamlessly onto the start

0

if other is completely dis-contiguous with thie series

Notes

if a raw numpy.ndarray is passed as other, with no metadata, then the contiguity check will always pass

item(*args)

Copy an element of an array to a scalar Quantity and return it.

Like item() except that it always returns a Quantity, not a Python scalar.

itemset(*args)

Insert scalar into an array (scalar is cast to array’s dtype, if possible)

There must be at least 1 argument, and define the last argument as item. Then, a.itemset(*args) is equivalent to but faster than a[args] = item. The item should be a scalar value and args must select a single item in the array a.

Parameters
*argsArguments

If one argument: a scalar, only used in case a is of size 1. If two arguments: the last argument is the value to be set and must be a scalar, the first argument specifies a single array element location. It is either an int or a tuple.

Notes

Compared to indexing syntax, itemset provides some speed increase for placing a scalar into a particular location in an ndarray, if you must do this. However, generally this is discouraged: among other problems, it complicates the appearance of the code. Also, when using itemset (and item) inside a loop, be sure to assign the methods to a local variable to avoid the attribute look-up at each loop iteration.

Examples

>>> np.random.seed(123)
>>> x = np.random.randint(9, size=(3, 3))
>>> x
array([[2, 2, 6],
       [1, 3, 6],
       [1, 0, 1]])
>>> x.itemset(4, 0)
>>> x.itemset((2, 2), 9)
>>> x
array([[2, 2, 6],
       [1, 0, 6],
       [1, 0, 9]])
max(axis=None, out=None, keepdims=False, initial=<no value>, where=True)

Return the maximum along a given axis.

Refer to numpy.amax for full documentation.

See also

numpy.amax

equivalent function

mean(axis=None, dtype=None, out=None, keepdims=False, *, where=True)

Returns the average of the array elements along given axis.

Refer to numpy.mean for full documentation.

See also

numpy.mean

equivalent function

median(axis=None, **kwargs)[source]

Compute the median along the specified axis.

Returns the median of the array elements.

Parameters
aarray_like

Input array or object that can be converted to an array.

axis{int, sequence of int, None}, optional

Axis or axes along which the medians are computed. The default is to compute the median along a flattened version of the array. A sequence of axes is supported since version 1.9.0.

outndarray, optional

Alternative output array in which to place the result. It must have the same shape and buffer length as the expected output, but the type (of the output) will be cast if necessary.

overwrite_inputbool, optional

If True, then allow use of memory of input array a for calculations. The input array will be modified by the call to median. This will save memory when you do not need to preserve the contents of the input array. Treat the input as undefined, but it will probably be fully or partially sorted. Default is False. If overwrite_input is True and a is not already an ndarray, an error will be raised.

keepdimsbool, optional

If this is set to True, the axes which are reduced are left in the result as dimensions with size one. With this option, the result will broadcast correctly against the original arr.

New in version 1.9.0.

Returns
medianndarray

A new array holding the result. If the input contains integers or floats smaller than float64, then the output data-type is np.float64. Otherwise, the data-type of the output is the same as that of the input. If out is specified, that array is returned instead.

See also

mean, percentile

Notes

Given a vector V of length N, the median of V is the middle value of a sorted copy of V, V_sorted - i e., V_sorted[(N-1)/2], when N is odd, and the average of the two middle values of V_sorted when N is even.

Examples

>>> a = np.array([[10, 7, 4], [3, 2, 1]])
>>> a
array([[10,  7,  4],
       [ 3,  2,  1]])
>>> np.median(a)
3.5
>>> np.median(a, axis=0)
array([6.5, 4.5, 2.5])
>>> np.median(a, axis=1)
array([7.,  2.])
>>> m = np.median(a, axis=0)
>>> out = np.zeros_like(m)
>>> np.median(a, axis=0, out=m)
array([6.5,  4.5,  2.5])
>>> m
array([6.5,  4.5,  2.5])
>>> b = a.copy()
>>> np.median(b, axis=1, overwrite_input=True)
array([7.,  2.])
>>> assert not np.all(a==b)
>>> b = a.copy()
>>> np.median(b, axis=None, overwrite_input=True)
3.5
>>> assert not np.all(a==b)
min(axis=None, out=None, keepdims=False, initial=<no value>, where=True)

Return the minimum along a given axis.

Refer to numpy.amin for full documentation.

See also

numpy.amin

equivalent function

nansum(axis=None, out=None, keepdims=False, *, initial=None, where=True)

Deprecated since version 5.3: The nansum method is deprecated and may be removed in a future version. Use np.nansum instead.

newbyteorder(new_order='S', /)

Return the array with the same data viewed with a different byte order.

Equivalent to:

arr.view(arr.dtype.newbytorder(new_order))

Changes are also made in all fields and sub-arrays of the array data type.

Parameters
new_orderstring, optional

Byte order to force; a value from the byte order specifications below. new_order codes can be any of:

  • ‘S’ - swap dtype from current to opposite endian

  • {‘<’, ‘little’} - little endian

  • {‘>’, ‘big’} - big endian

  • {‘=’, ‘native’} - native order, equivalent to sys.byteorder

  • {‘|’, ‘I’} - ignore (no change to byte order)

The default value (‘S’) results in swapping the current byte order.

Returns
new_arrarray

New array object with the dtype reflecting given change to the byte order.

nonzero()

Return the indices of the elements that are non-zero.

Refer to numpy.nonzero for full documentation.

See also

numpy.nonzero

equivalent function

override_unit(unit, parse_strict='raise')[source]

Forcefully reset the unit of these data

Use of this method is discouraged in favour of to(), which performs accurate conversions from one unit to another. The method should really only be used when the original unit of the array is plain wrong.

Parameters
unitUnit, str

the unit to force onto this array

parse_strictstr, optional

how to handle errors in the unit parsing, default is to raise the underlying exception from astropy.units

Raises
ValueError

if a str cannot be parsed as a valid unit

pad(pad_width, **kwargs)[source]

Pad this series to a new size

Parameters
pad_widthint, pair of ints

number of samples by which to pad each end of the array; given a single int to pad both ends by the same amount, or a (before, after) tuple for assymetric padding

**kwargs

see numpy.pad() for kwarg documentation

Returns
seriesSeries

the padded version of the input

See also

numpy.pad

for details on the underlying functionality

partition(kth, axis=- 1, kind='introselect', order=None)

Rearranges the elements in the array in such a way that the value of the element in kth position is in the position it would be in a sorted array. All elements smaller than the kth element are moved before this element and all equal or greater are moved behind it. The ordering of the elements in the two partitions is undefined.

New in version 1.8.0.

Parameters
kthint or sequence of ints

Element index to partition by. The kth element value will be in its final sorted position and all smaller elements will be moved before it and all equal or greater elements behind it. The order of all elements in the partitions is undefined. If provided with a sequence of kth it will partition all elements indexed by kth of them into their sorted position at once.

Deprecated since version 1.22.0: Passing booleans as index is deprecated.

axisint, optional

Axis along which to sort. Default is -1, which means sort along the last axis.

kind{‘introselect’}, optional

Selection algorithm. Default is ‘introselect’.

orderstr or list of str, optional

When a is an array with fields defined, this argument specifies which fields to compare first, second, etc. A single field can be specified as a string, and not all fields need to be specified, but unspecified fields will still be used, in the order in which they come up in the dtype, to break ties.

See also

numpy.partition

Return a partitioned copy of an array.

argpartition

Indirect partition.

sort

Full sort.

Notes

See np.partition for notes on the different algorithms.

Examples

>>> a = np.array([3, 4, 2, 1])
>>> a.partition(3)
>>> a
array([2, 1, 3, 4])
>>> a.partition((1, 3))
>>> a
array([1, 2, 3, 4])
plot(format='segments', bits=None, **kwargs)[source]

Plot the data for this StateVector

Parameters
formatstr, optional, default: 'segments'

The type of plot to make, either ‘segments’ to plot the SegmentList for each bit, or ‘timeseries’ to plot the raw data for this StateVector

bitslist, optional

A list of bit indices or bit names, defaults to bits. This argument is ignored if format is not 'segments'

**kwargs

Other keyword arguments to be passed to either plot or plot, depending on format.

Returns
plotPlot

output plot object

See also

matplotlib.pyplot.figure

for documentation of keyword arguments used to create the figure

matplotlib.figure.Figure.add_subplot

for documentation of keyword arguments used to create the axes

gwpy.plot.SegmentAxes.plot_flag

for documentation of keyword arguments used in rendering each statevector flag.

prepend(other, inplace=True, pad=None, gap=None, resize=True)[source]

Connect another series onto the start of the current one.

Parameters
otherSeries

another series of the same type as this one

inplacebool, optional

perform operation in-place, modifying current series, otherwise copy data and return new series, default: True

Warning

inplace prepend bypasses the reference check in numpy.ndarray.resize, so be carefully to only use this for arrays that haven’t been sharing their memory!

padfloat, optional

value with which to pad discontiguous series, by default gaps will result in a ValueError.

gapstr, optional

action to perform if there’s a gap between the other series and this one. One of

  • 'raise' - raise a ValueError

  • 'ignore' - remove gap and join data

  • 'pad' - pad gap with zeros

If pad is given and is not None, the default is 'pad', otherwise 'raise'.

resizebool, optional

resize this array to accommodate new data, otherwise shift the old data to the left (potentially falling off the start) and put the new data in at the end, default: True.

Returns
seriesTimeSeries

time-series containing joined data sets

prod(axis=None, dtype=None, out=None, keepdims=False, initial=1, where=True)

Return the product of the array elements over the given axis

Refer to numpy.prod for full documentation.

See also

numpy.prod

equivalent function

ptp(axis=None, out=None, keepdims=False)

Peak to peak (maximum - minimum) value along a given axis.

Refer to numpy.ptp for full documentation.

See also

numpy.ptp

equivalent function

put(indices, values, mode='raise')

Set a.flat[n] = values[n] for all n in indices.

Refer to numpy.put for full documentation.

See also

numpy.put

equivalent function

ravel([order])

Return a flattened array.

Refer to numpy.ravel for full documentation.

See also

numpy.ravel

equivalent function

ndarray.flat

a flat iterator on the array.

classmethod read(source, *args, **kwargs)[source]

Read data into a StateVector

Parameters
sourcestr, list

Source of data, any of the following:

  • str path of single data file,

  • str path of LAL-format cache file,

  • list of paths.

channelstr, Channel

the name of the channel to read, or a Channel object.

startLIGOTimeGPS, float, str

GPS start time of required data, any input parseable by to_gps is fine

endLIGOTimeGPS, float, str, optional

GPS end time of required data, defaults to end of data found; any input parseable by to_gps is fine

bitslist, optional

list of bits names for this StateVector, give None at any point in the list to mask that bit

formatstr, optional

source format identifier. If not given, the format will be detected if possible. See below for list of acceptable formats.

nprocint, optional, default: 1

number of parallel processes to use, serial process by default.

gapstr, optional

how to handle gaps in the cache, one of

  • ‘ignore’: do nothing, let the underlying reader method handle it

  • ‘warn’: do nothing except print a warning to the screen

  • ‘raise’: raise an exception upon finding a gap (default)

  • ‘pad’: insert a value to fill the gaps

padfloat, optional

value with which to fill gaps in the source data, only used if gap is not given, or gap='pad' is given

Raises
IndexError

if source is an empty list

Notes

The available built-in formats are:

Format

Read

Write

Auto-identify

csv

Yes

Yes

Yes

gwf

Yes

Yes

Yes

gwf.framecpp

Yes

Yes

No

gwf.framel

Yes

Yes

No

gwf.lalframe

Yes

Yes

No

hdf5

Yes

Yes

Yes

hdf5.gwosc

Yes

No

No

txt

Yes

Yes

Yes

Examples

To read the S6 state vector, with names for all the bits:

>>> sv = StateVector.read(
    'H-H1_LDAS_C02_L2-968654592-128.gwf', 'H1:IFO-SV_STATE_VECTOR',
    bits=['Science mode', 'Conlog OK', 'Locked',
          'No injections', 'No Excitations'],
    dtype='uint32')

then you can convert these to segments

>>> segments = sv.to_dqflags()

or to read just the interferometer operations bits:

>>> sv = StateVector.read(
    'H-H1_LDAS_C02_L2-968654592-128.gwf', 'H1:IFO-SV_STATE_VECTOR',
    bits=['Science mode', None, 'Locked'], dtype='uint32')

Running to_dqflags on this example would only give 2 flags, rather than all five.

Alternatively the bits attribute can be reset after reading, but before any further operations.

repeat(repeats, axis=None)

Repeat elements of an array.

Refer to numpy.repeat for full documentation.

See also

numpy.repeat

equivalent function

resample(rate)[source]

Resample this StateVector to a new rate

Because of the nature of a state-vector, downsampling is done by taking the logical ‘and’ of all original samples in each new sampling interval, while upsampling is achieved by repeating samples.

Parameters
ratefloat

rate to which to resample this StateVector, must be a divisor of the original sample rate (when downsampling) or a multiple of the original (when upsampling).

Returns
vectorStateVector

resampled version of the input StateVector

reshape(shape, order='C')

Returns an array containing the same data with a new shape.

Refer to numpy.reshape for full documentation.

See also

numpy.reshape

equivalent function

Notes

Unlike the free function numpy.reshape, this method on ndarray allows the elements of the shape parameter to be passed in as separate arguments. For example, a.reshape(10, 11) is equivalent to a.reshape((10, 11)).

resize(new_shape, refcheck=True)

Change shape and size of array in-place.

Parameters
new_shapetuple of ints, or n ints

Shape of resized array.

refcheckbool, optional

If False, reference count will not be checked. Default is True.

Returns
None
Raises
ValueError

If a does not own its own data or references or views to it exist, and the data memory must be changed. PyPy only: will always raise if the data memory must be changed, since there is no reliable way to determine if references or views to it exist.

SystemError

If the order keyword argument is specified. This behaviour is a bug in NumPy.

See also

resize

Return a new array with the specified shape.

Notes

This reallocates space for the data area if necessary.

Only contiguous arrays (data elements consecutive in memory) can be resized.

The purpose of the reference count check is to make sure you do not use this array as a buffer for another Python object and then reallocate the memory. However, reference counts can increase in other ways so if you are sure that you have not shared the memory for this array with another Python object, then you may safely set refcheck to False.

Examples

Shrinking an array: array is flattened (in the order that the data are stored in memory), resized, and reshaped:

>>> a = np.array([[0, 1], [2, 3]], order='C')
>>> a.resize((2, 1))
>>> a
array([[0],
       [1]])
>>> a = np.array([[0, 1], [2, 3]], order='F')
>>> a.resize((2, 1))
>>> a
array([[0],
       [2]])

Enlarging an array: as above, but missing entries are filled with zeros:

>>> b = np.array([[0, 1], [2, 3]])
>>> b.resize(2, 3) # new_shape parameter doesn't have to be a tuple
>>> b
array([[0, 1, 2],
       [3, 0, 0]])

Referencing an array prevents resizing…

>>> c = a
>>> a.resize((1, 1))
Traceback (most recent call last):
...
ValueError: cannot resize an array that references or is referenced ...

Unless refcheck is False:

>>> a.resize((1, 1), refcheck=False)
>>> a
array([[0]])
>>> c
array([[0]])
round(decimals=0, out=None)

Return a with each element rounded to the given number of decimals.

Refer to numpy.around for full documentation.

See also

numpy.around

equivalent function

searchsorted(v, side='left', sorter=None)

Find indices where elements of v should be inserted in a to maintain order.

For full documentation, see numpy.searchsorted

See also

numpy.searchsorted

equivalent function

setfield(val, dtype, offset=0)

Put a value into a specified place in a field defined by a data-type.

Place val into a’s field defined by dtype and beginning offset bytes into the field.

Parameters
valobject

Value to be placed in field.

dtypedtype object

Data-type of the field in which to place val.

offsetint, optional

The number of bytes into the field at which to place val.

Returns
None

See also

getfield

Examples

>>> x = np.eye(3)
>>> x.getfield(np.float64)
array([[1.,  0.,  0.],
       [0.,  1.,  0.],
       [0.,  0.,  1.]])
>>> x.setfield(3, np.int32)
>>> x.getfield(np.int32)
array([[3, 3, 3],
       [3, 3, 3],
       [3, 3, 3]], dtype=int32)
>>> x
array([[1.0e+000, 1.5e-323, 1.5e-323],
       [1.5e-323, 1.0e+000, 1.5e-323],
       [1.5e-323, 1.5e-323, 1.0e+000]])
>>> x.setfield(np.eye(3), np.int32)
>>> x
array([[1.,  0.,  0.],
       [0.,  1.,  0.],
       [0.,  0.,  1.]])
setflags(write=None, align=None, uic=None)

Set array flags WRITEABLE, ALIGNED, WRITEBACKIFCOPY, respectively.

These Boolean-valued flags affect how numpy interprets the memory area used by a (see Notes below). The ALIGNED flag can only be set to True if the data is actually aligned according to the type. The WRITEBACKIFCOPY and flag can never be set to True. The flag WRITEABLE can only be set to True if the array owns its own memory, or the ultimate owner of the memory exposes a writeable buffer interface, or is a string. (The exception for string is made so that unpickling can be done without copying memory.)

Parameters
writebool, optional

Describes whether or not a can be written to.

alignbool, optional

Describes whether or not a is aligned properly for its type.

uicbool, optional

Describes whether or not a is a copy of another “base” array.

Notes

Array flags provide information about how the memory area used for the array is to be interpreted. There are 7 Boolean flags in use, only four of which can be changed by the user: WRITEBACKIFCOPY, WRITEABLE, and ALIGNED.

WRITEABLE (W) the data area can be written to;

ALIGNED (A) the data and strides are aligned appropriately for the hardware (as determined by the compiler);

WRITEBACKIFCOPY (X) this array is a copy of some other array (referenced by .base). When the C-API function PyArray_ResolveWritebackIfCopy is called, the base array will be updated with the contents of this array.

All flags can be accessed using the single (upper case) letter as well as the full name.

Examples

>>> y = np.array([[3, 1, 7],
...               [2, 0, 0],
...               [8, 5, 9]])
>>> y
array([[3, 1, 7],
       [2, 0, 0],
       [8, 5, 9]])
>>> y.flags
  C_CONTIGUOUS : True
  F_CONTIGUOUS : False
  OWNDATA : True
  WRITEABLE : True
  ALIGNED : True
  WRITEBACKIFCOPY : False
>>> y.setflags(write=0, align=0)
>>> y.flags
  C_CONTIGUOUS : True
  F_CONTIGUOUS : False
  OWNDATA : True
  WRITEABLE : False
  ALIGNED : False
  WRITEBACKIFCOPY : False
>>> y.setflags(uic=1)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ValueError: cannot set WRITEBACKIFCOPY flag to True
shift(delta)[source]

Shift this Series forward on the X-axis by delta

This modifies the series in-place.

Parameters
deltafloat, Quantity, str

The amount by which to shift (in x-axis units if float), give a negative value to shift backwards in time

Examples

>>> from gwpy.types import Series
>>> a = Series([1, 2, 3, 4, 5], x0=0, dx=1, xunit='m')
>>> print(a.x0)
0.0 m
>>> a.shift(5)
>>> print(a.x0)
5.0 m
>>> a.shift('-1 km')
-995.0 m
sort(axis=- 1, kind=None, order=None)

Sort an array in-place. Refer to numpy.sort for full documentation.

Parameters
axisint, optional

Axis along which to sort. Default is -1, which means sort along the last axis.

kind{‘quicksort’, ‘mergesort’, ‘heapsort’, ‘stable’}, optional

Sorting algorithm. The default is ‘quicksort’. Note that both ‘stable’ and ‘mergesort’ use timsort under the covers and, in general, the actual implementation will vary with datatype. The ‘mergesort’ option is retained for backwards compatibility.

Changed in version 1.15.0: The ‘stable’ option was added.

orderstr or list of str, optional

When a is an array with fields defined, this argument specifies which fields to compare first, second, etc. A single field can be specified as a string, and not all fields need be specified, but unspecified fields will still be used, in the order in which they come up in the dtype, to break ties.

See also

numpy.sort

Return a sorted copy of an array.

numpy.argsort

Indirect sort.

numpy.lexsort

Indirect stable sort on multiple keys.

numpy.searchsorted

Find elements in sorted array.

numpy.partition

Partial sort.

Notes

See numpy.sort for notes on the different sorting algorithms.

Examples

>>> a = np.array([[1,4], [3,1]])
>>> a.sort(axis=1)
>>> a
array([[1, 4],
       [1, 3]])
>>> a.sort(axis=0)
>>> a
array([[1, 3],
       [1, 4]])

Use the order keyword to specify a field to use when sorting a structured array:

>>> a = np.array([('a', 2), ('c', 1)], dtype=[('x', 'S1'), ('y', int)])
>>> a.sort(order='y')
>>> a
array([(b'c', 1), (b'a', 2)],
      dtype=[('x', 'S1'), ('y', '<i8')])
squeeze(axis=None)

Remove axes of length one from a.

Refer to numpy.squeeze for full documentation.

See also

numpy.squeeze

equivalent function

std(axis=None, dtype=None, out=None, ddof=0, keepdims=False, *, where=True)

Returns the standard deviation of the array elements along given axis.

Refer to numpy.std for full documentation.

See also

numpy.std

equivalent function

step(**kwargs)[source]

Create a step plot of this series

sum(axis=None, dtype=None, out=None, keepdims=False, initial=0, where=True)

Return the sum of the array elements over the given axis.

Refer to numpy.sum for full documentation.

See also

numpy.sum

equivalent function

swapaxes(axis1, axis2)

Return a view of the array with axis1 and axis2 interchanged.

Refer to numpy.swapaxes for full documentation.

See also

numpy.swapaxes

equivalent function

take(indices, axis=None, out=None, mode='raise')

Return an array formed from the elements of a at the given indices.

Refer to numpy.take for full documentation.

See also

numpy.take

equivalent function

to(unit, equivalencies=[], copy=True)

Return a new Quantity object with the specified unit.

Parameters
unitunit-like

An object that represents the unit to convert to. Must be an UnitBase object or a string parseable by the units package.

equivalencieslist of tuple

A list of equivalence pairs to try if the units are not directly convertible. See Equivalencies. If not provided or [], class default equivalencies will be used (none for Quantity, but may be set for subclasses) If None, no equivalencies will be applied at all, not even any set globally or within a context.

copybool, optional

If True (default), then the value is copied. Otherwise, a copy will only be made if necessary.

See also

to_value

get the numerical value in a given unit.

to_dqflags(bits=None, minlen=1, dtype=<class 'float'>, round=False)[source]

Convert this StateVector into a DataQualityDict

The StateTimeSeries for each bit is converted into a DataQualityFlag with the bits combined into a dict.

Parameters
minlenint, optional, default: 1

minimum number of consecutive True values to identify as a Segment. This is useful to ignore single bit flips, for example.

bitslist, optional

a list of bit indices or bit names to select, defaults to bits

Returns
DataQualityFlag listlist

a list of DataQualityFlag reprensentations for each bit in this StateVector

See also

StateTimeSeries.to_dqflag

for details on the segment representation method for StateVector bits

to_lal()[source]

Convert this TimeSeries into a LAL TimeSeries.

Note

This operation always copies data to new memory.

to_pycbc(copy=True)[source]

Convert this TimeSeries into a PyCBC TimeSeries

Parameters
copybool, optional, default: True

if True, copy these data to a new array

Returns
timeseriesTimeSeries

a PyCBC representation of this TimeSeries

to_string(unit=None, precision=None, format=None, subfmt=None)

Generate a string representation of the quantity and its unit.

The behavior of this function can be altered via the numpy.set_printoptions function and its various keywords. The exception to this is the threshold keyword, which is controlled via the [units.quantity] configuration item latex_array_threshold. This is treated separately because the numpy default of 1000 is too big for most browsers to handle.

Parameters
unitunit-like, optional

Specifies the unit. If not provided, the unit used to initialize the quantity will be used.

precisionnumber, optional

The level of decimal precision. If None, or not provided, it will be determined from NumPy print options.

formatstr, optional

The format of the result. If not provided, an unadorned string is returned. Supported values are:

  • ‘latex’: Return a LaTeX-formatted string

  • ‘latex_inline’: Return a LaTeX-formatted string that uses negative exponents instead of fractions

subfmtstr, optional

Subformat of the result. For the moment, only used for format='latex' and format='latex_inline'. Supported values are:

  • ‘inline’: Use $ ... $ as delimiters.

  • ‘display’: Use $\displaystyle ... $ as delimiters.

Returns
str

A string with the contents of this Quantity

to_value(unit=None, equivalencies=[])

The numerical value, possibly in a different unit.

Parameters
unitunit-like, optional

The unit in which the value should be given. If not given or None, use the current unit.

equivalencieslist of tuple, optional

A list of equivalence pairs to try if the units are not directly convertible (see Equivalencies). If not provided or [], class default equivalencies will be used (none for Quantity, but may be set for subclasses). If None, no equivalencies will be applied at all, not even any set globally or within a context.

Returns
valuendarray or scalar

The value in the units specified. For arrays, this will be a view of the data if no unit conversion was necessary.

See also

to

Get a new instance in a different unit.

tobytes(order='C')

Not implemented, use .value.tobytes() instead.

tofile(fid, sep='', format='%s')

Not implemented, use .value.tofile() instead.

tolist()

Return the array as an a.ndim-levels deep nested list of Python scalars.

Return a copy of the array data as a (nested) Python list. Data items are converted to the nearest compatible builtin Python type, via the item function.

If a.ndim is 0, then since the depth of the nested list is 0, it will not be a list at all, but a simple Python scalar.

Parameters
none
Returns
yobject, or list of object, or list of list of object, or …

The possibly nested list of array elements.

Notes

The array may be recreated via a = np.array(a.tolist()), although this may sometimes lose precision.

Examples

For a 1D array, a.tolist() is almost the same as list(a), except that tolist changes numpy scalars to Python scalars:

>>> a = np.uint32([1, 2])
>>> a_list = list(a)
>>> a_list
[1, 2]
>>> type(a_list[0])
<class 'numpy.uint32'>
>>> a_tolist = a.tolist()
>>> a_tolist
[1, 2]
>>> type(a_tolist[0])
<class 'int'>

Additionally, for a 2D array, tolist applies recursively:

>>> a = np.array([[1, 2], [3, 4]])
>>> list(a)
[array([1, 2]), array([3, 4])]
>>> a.tolist()
[[1, 2], [3, 4]]

The base case for this recursion is a 0D array:

>>> a = np.array(1)
>>> list(a)
Traceback (most recent call last):
  ...
TypeError: iteration over a 0-d array
>>> a.tolist()
1
tostring(order='C')[source]

Construct Python bytes containing the raw data bytes in the array.

Constructs Python bytes showing a copy of the raw contents of data memory. The bytes object is produced in C-order by default. This behavior is controlled by the order parameter.

New in version 1.9.0.

Parameters
order{‘C’, ‘F’, ‘A’}, optional

Controls the memory layout of the bytes object. ‘C’ means C-order, ‘F’ means F-order, ‘A’ (short for Any) means ‘F’ if a is Fortran contiguous, ‘C’ otherwise. Default is ‘C’.

Returns
sbytes

Python bytes exhibiting a copy of a’s raw data.

See also

frombuffer

Inverse of this operation, construct a 1-dimensional array from Python bytes.

Examples

>>> x = np.array([[0, 1], [2, 3]], dtype='<u2')
>>> x.tobytes()
b'\x00\x00\x01\x00\x02\x00\x03\x00'
>>> x.tobytes('C') == x.tobytes()
True
>>> x.tobytes('F')
b'\x00\x00\x02\x00\x01\x00\x03\x00'
trace(offset=0, axis1=0, axis2=1, dtype=None, out=None)

Return the sum along diagonals of the array.

Refer to numpy.trace for full documentation.

See also

numpy.trace

equivalent function

transpose(*axes)

Returns a view of the array with axes transposed.

Refer to numpy.transpose for full documentation.

Parameters
axesNone, tuple of ints, or n ints
  • None or no argument: reverses the order of the axes.

  • tuple of ints: i in the j-th place in the tuple means that the array’s i-th axis becomes the transposed array’s j-th axis.

  • n ints: same as an n-tuple of the same ints (this form is intended simply as a “convenience” alternative to the tuple form).

Returns
pndarray

View of the array with its axes suitably permuted.

See also

transpose

Equivalent function.

ndarray.T

Array property returning the array transposed.

ndarray.reshape

Give a new shape to an array without changing its data.

Examples

>>> a = np.array([[1, 2], [3, 4]])
>>> a
array([[1, 2],
       [3, 4]])
>>> a.transpose()
array([[1, 3],
       [2, 4]])
>>> a.transpose((1, 0))
array([[1, 3],
       [2, 4]])
>>> a.transpose(1, 0)
array([[1, 3],
       [2, 4]])
>>> a = np.array([1, 2, 3, 4])
>>> a
array([1, 2, 3, 4])
>>> a.transpose()
array([1, 2, 3, 4])
update(other, inplace=True)[source]

Update this series by appending new data from an other and dropping the same amount of data off the start.

This is a convenience method that just calls append with resize=False.

value_at(x)[source]

Return the value of this Series at the given xindex value

Parameters
xfloat, Quantity

the xindex value at which to search

Returns
yQuantity

the value of this Series at the given xindex value

var(axis=None, dtype=None, out=None, ddof=0, keepdims=False, *, where=True)

Returns the variance of the array elements, along given axis.

Refer to numpy.var for full documentation.

See also

numpy.var

equivalent function

view([dtype][, type])

New view of array with the same data.

Note

Passing None for dtype is different from omitting the parameter, since the former invokes dtype(None) which is an alias for dtype('float_').

Parameters
dtypedata-type or ndarray sub-class, optional

Data-type descriptor of the returned view, e.g., float32 or int16. Omitting it results in the view having the same data-type as a. This argument can also be specified as an ndarray sub-class, which then specifies the type of the returned object (this is equivalent to setting the type parameter).

typePython type, optional

Type of the returned view, e.g., ndarray or matrix. Again, omission of the parameter results in type preservation.

Notes

a.view() is used two different ways:

a.view(some_dtype) or a.view(dtype=some_dtype) constructs a view of the array’s memory with a different data-type. This can cause a reinterpretation of the bytes of memory.

a.view(ndarray_subclass) or a.view(type=ndarray_subclass) just returns an instance of ndarray_subclass that looks at the same array (same shape, dtype, etc.) This does not cause a reinterpretation of the memory.

For a.view(some_dtype), if some_dtype has a different number of bytes per entry than the previous dtype (for example, converting a regular array to a structured array), then the last axis of a must be contiguous. This axis will be resized in the result.

Changed in version 1.23.0: Only the last axis needs to be contiguous. Previously, the entire array had to be C-contiguous.

Examples

>>> x = np.array([(1, 2)], dtype=[('a', np.int8), ('b', np.int8)])

Viewing array data using a different type and dtype:

>>> y = x.view(dtype=np.int16, type=np.matrix)
>>> y
matrix([[513]], dtype=int16)
>>> print(type(y))
<class 'numpy.matrix'>

Creating a view on a structured array so it can be used in calculations

>>> x = np.array([(1, 2),(3,4)], dtype=[('a', np.int8), ('b', np.int8)])
>>> xv = x.view(dtype=np.int8).reshape(-1,2)
>>> xv
array([[1, 2],
       [3, 4]], dtype=int8)
>>> xv.mean(0)
array([2.,  3.])

Making changes to the view changes the underlying array

>>> xv[0,1] = 20
>>> x
array([(1, 20), (3,  4)], dtype=[('a', 'i1'), ('b', 'i1')])

Using a view to convert an array to a recarray:

>>> z = x.view(np.recarray)
>>> z.a
array([1, 3], dtype=int8)

Views share data:

>>> x[0] = (9, 10)
>>> z[0]
(9, 10)

Views that change the dtype size (bytes per entry) should normally be avoided on arrays defined by slices, transposes, fortran-ordering, etc.:

>>> x = np.array([[1, 2, 3], [4, 5, 6]], dtype=np.int16)
>>> y = x[:, ::2]
>>> y
array([[1, 3],
       [4, 6]], dtype=int16)
>>> y.view(dtype=[('width', np.int16), ('length', np.int16)])
Traceback (most recent call last):
    ...
ValueError: To change to a dtype of a different size, the last axis must be contiguous
>>> z = y.copy()
>>> z.view(dtype=[('width', np.int16), ('length', np.int16)])
array([[(1, 3)],
       [(4, 6)]], dtype=[('width', '<i2'), ('length', '<i2')])

However, views that change dtype are totally fine for arrays with a contiguous last axis, even if the rest of the axes are not C-contiguous:

>>> x = np.arange(2 * 3 * 4, dtype=np.int8).reshape(2, 3, 4)
>>> x.transpose(1, 0, 2).view(np.int16)
array([[[ 256,  770],
        [3340, 3854]],

       [[1284, 1798],
        [4368, 4882]],

       [[2312, 2826],
        [5396, 5910]]], dtype=int16)
write(target, *args, **kwargs)[source]

Write this TimeSeries to a file

Parameters
targetstr

path of output file

formatstr, optional

output format identifier. If not given, the format will be detected if possible. See below for list of acceptable formats.

Notes

The available built-in formats are:

Format

Read

Write

Auto-identify

csv

Yes

Yes

Yes

gwf

Yes

Yes

Yes

gwf.framecpp

Yes

Yes

No

gwf.framel

Yes

Yes

No

gwf.lalframe

Yes

Yes

No

hdf5

Yes

Yes

Yes

txt

Yes

Yes

Yes

wav

Yes

Yes

No

zip()[source]

Zip the xindex and value arrays of this Series

Returns
stacked2-d numpy.ndarray

The array formed by stacking the the xindex and value of this series

Examples

>>> a = Series([0, 2, 4, 6, 8], xindex=[-5, -4, -3, -2, -1])
>>> a.zip()
array([[-5.,  0.],
       [-4.,  2.],
       [-3.,  4.],
       [-2.,  6.],
       [-1.,  8.]])