Time series plots
=============================

The time series plots label the axes X and Y.  To adjust the limits use the ``--xmin``, ``xmax``,
``ymin``, ``ymax``.  The default is to set the axes limits to show all the data.  A good
reason to adjust the y-axis limits is to compare different plots.  The x-axis is generally controlled
by the amount of data transferred but the data transfer is only controllable to integer second resolution.
The x-axis limits may be set in fractional seconds of arbitrary resolution.  The x limits may be
specified in GPS seconds or as an offset from start time.

To produce a log-log or semi-log plot use the ``--logx`` and/or ``--logy`` parameters.

The following image is a semi-log plot of the pressure in HVEA during a pump down procedure.  It
shows 10 hours of the mean minute trend.  Notice the syntax for that channel.
It is created with the following command line

.. code-block:: sh

    gwpy-plot timeseries --chan LVE-EX:X3_810BTORR.mean,m-trend --start 1072539420 \
        --dur 36000 --logy

.. image:: cli-ts-02.png
    :align: center
    :alt: HVEA pressure during pump down

The next example is a sub-second plot of a DARM channel.
It is created with the following command line:

.. code-block:: sh

    gwpy-plot timeseries --chan L1:OAF-CAL_DARM_DQ --start 1107936100 --xmin 1107936100.2 \
        --xmax 1107936100.25 --epoch 0.225 --duration 1


.. image:: cli-ts-01.png
    :align: center
    :alt: sample spectrum

Notice the use of the ``--epoch`` parameter to set the 0 point of the time axis to the middle
of the plot.

The full help for the Time Series product is:

.. code-block:: sh

    $ gwpy-plot timeseries --help
    usage: gwpy-plot timeseries [-h] [-v] [-s SILENT] --chan CHAN [CHAN ...]
                            --start START [START ...] [--duration DURATION]
                            [-c FRAMECACHE] [--highpass HIGHPASS] [--logx]
                            [--epoch EPOCH] [--xmin XMIN] [--xmax XMAX]
                            [--logy] [--ymin YMIN] [--ymax YMAX] [-g GEOMETRY]
                            [--interactive] [--title TITLE]
                            [--suptitle SUPTITLE] [--xlabel XLABEL]
                            [--ylabel YLABEL] [--out OUT]
                            [--legend [LEGEND [LEGEND ...]]] [--nolegend]
                            [--nogrid]

    optional arguments:
      -h, --help            show this help message and exit
      -v, --verbose         increase verbose output
      -s SILENT, --silent SILENT
                            show only fatal errors
      --chan CHAN [CHAN ...]
                            One or more channel names.
      --start START [START ...]
                            Starting GPS times(required)
      --duration DURATION   Duration (seconds) [10]
      -c FRAMECACHE, --framecache FRAMECACHE
                            use .gwf files in cache not NDS2, default use NDS2
      --highpass HIGHPASS   frequency for high pass butterworth, default no filter
      --logx                make X-axis logarithmic, default=linear
      --epoch EPOCH         center X axis on this GPS time. Incompatible with logx
      --xmin XMIN           min value for X-axis
      --xmax XMAX           max value for X-axis
      --logy                make Y-axis logarithmic, default=linear
      --ymin YMIN           fix min value for yaxis defaults to min of data
      --ymax YMAX           max value for y-axis default to max of data
      -g GEOMETRY, --geometry GEOMETRY
                            size of resulting image WxH, default: 1200x600
      --interactive         when running from ipython allows experimentation
      --title TITLE         One or more title lines
      --suptitle SUPTITLE   1st title line (larger than the others)
      --xlabel XLABEL       x axis text
      --ylabel YLABEL       y axis text
      --out OUT             output filename, type=ext (png, pdf, jpg),
                            default=gwpy.png
      --legend [LEGEND [LEGEND ...]]
                            strings to match data files
      --nolegend            do not display legend
      --nogrid              do not display grid lines

.. rubric:: Next

.. toctree::
   :maxdepth: 1

   spectrum.rst